190SL sway bar end link kit (3/8” O/S bolt for 1” Bar) (2) PER CAR SOLD EACH

All except 219 220 220SEArticle code: v.nr.1203300903

for the 190SL with chassis number 5501502 and up.Article code: v.nr.1214601505

for 190SL with chassis number UP TO 5501501 and all 180 Sedans with Left Hand Drive.Article code: v.nr.1204601305

For 190sl For 190,d & late 180b,c,db,dc from Chassis#02946. For 230sl 250sl 280sl. For all 107 Chassis.Article code: v.nr.0009815805

For 190sl For all except 190,d & late 180b,c,db,dc Up to Chassis #02945Article code: v.nr.0019816505

For 190sl For all except 190,d & late 180b,c,db,dc up to Chassis #02945.Article code: v.nr.000720032303

For 190sl up To Chassis #021754 For all round body sedans except 190,d & late 180b,c,db,dc.Article code: v.nr.0009971846

KING PIN KIT

LOWER CONTROL ARM KIT

MAIN LINK ROD ONLYArticle code: v.nr.1203330230

Article code: v.nr.1863330065

SWAY BAR MOUNT BUSHING 190SL AND PONTON

BILSTEIN BRAND Most Models from 1955 thru 1961 Article code: v.nr.1803230500

Steering Lever Locking Plate W105  W108  W109  W110  W111  W112  W113  W120  W121  W128  W180  W186  W187  W188  W189  W191  W198   

Article code: v.nr.211-425-021ABR

Article code: v.nr.1203331965

Right Hand Thread.Article code: v.nr.0003385210

left hand Thread.Article code: v.nr.0003385010

UPPER OUTER ARM KIT

MAIN LINK ROD ONLY

URETHANE FRONT SWAY BAR END LINK BUSHING QTY NEEDED PER CAR MODEL SOLD EACH 8 Needed per Car  

SWAY BAR MOUNT BUSHING 190SL AND PONTON 2 REQUIRED SOLD EACH

190SL URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.

190SL URETHANE SUSPENSION KIT BUSHINGS ONLY YOU WILL NEED TO REUSE YOUR EXISTING HARDWARE NOTE: Before selecting a front sway bar frame bushing, please measure the bar diameter first. Use either a flexible tape or a pair of calipers as shown. Do not use a flat ruler. With Calipers With flexible tape If using an inch tape – take measurement and divide by 3.142 to get the diameter. To convert from inches to mm, simply multiply by 25.4. In both cases, this sway bar measures 24mm.