The Battery Tender® Junior High Efficiency (6V 1.25A) offers much more than a trickle charger could offer. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your battery fully charged so that it is ready to go when you are! This unit replaces both the 021-0127 (BT JR 6V, 0.75A) and 021-0144 (BT Plus 6, 1.25A) in all markets. Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Input: 120VAC, 60Hz Output: 6 Volts DC @ 1.25 Amp Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Solid state two color LED indicates stage of charger. Spark proof. Reverse polarity protected. 12' output cord. 5 year warranty Listed in California Appliance Efficiency Database Agency Approvals: UL/CSA/BC Input: 120VAC, 60Hz Output: 6 Volts DC @ 1.25 Amp Perfect for all lead-acid, flooded or sealed maintenance free batteries (AGM and gel cell). Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode). Automatically switches to float / maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. Solid state two color LED indicates stage of charger. Spark proof. Reverse polarity protected. 12' output cord. Safety timer: 72 hrs. Listed in California Appliance Efficiency Database Agency Approvals: UL / CSA / BC / FCC 5 year warranty
For: 180b,c,db,dc,190b,db,and 220SE from chassis number 002430.Article code: v.nr.1114600642
GASKET, LEFT (SEAL)FOR FRONT MUDGUARD AT FRONT WALLAlso displayed at item no. 65
GASKET (SEAL) 180B 180C 180Db 180dcAT CENTER PILLAR UNDER ENTRANCE PLATES 3,5X9,5 DIN 7981 FOR ENTRANCE PLATE AT BODY M 6X20 DIN 933-8 G FOR ENTRANCE PLATE AT BASE PLATE
GASKET (SEAL) BETWEEN ENTRANCE SILL AND REAR FENDER, LEFT AND RIGHT, OUTSIDE 105 120 121 128 180
Tan German to cover the Soft Top FrameArticle code: v.nr.440053B
front right all Models FOR 230SL WITH GIRLING CALIPERS, ATE CALIPERS MUST BE REPLACED IN PAIRS ONLYArticle code: v.nr.0014218298
front left all ModelsFOR 230SL WITH GIRLING CALIPERS, ATE CALIPERS MUST BE REPLACED IN PAIRSArticle code: v.nr.0014218198
ALL METALTHIS WAS USED FROM 1955 TO MID 1957Article code: v.nr.270025
The Middle prong in the picture is a plastic seperator that prevents the 2 wires from touching when plugged in.Article code: v.nr.0015450809
MID/LATE - SEE DETAILS280SL 107.042 FROM 000989 UP TO 017463 280SLC 107.022 FROM 001212 TO END 350SL 107.043 FROM 012084 TO END 350SLC 107.023 FROM 010577 TO END 380SL 107.045 UP TO 028725 380SLC 107.025 ALL 450SL 107.044 FROM 044010 TO END 450SLC 107.024 FROM 020047
New Tail Light Reflector fits Late Style Ponton and 190sl Will not fit an Early Style 190Sl or Ponton